3M #519YT Die-Cut Sandblast Stencil
3M(TM) Die-Cut Sandblast Stencil 519YT features a double liner design for optimum support for center of letters, numbers and designs. The translucent yellow inner liner provides greater visibility of cut designs during positioning and blasting. The white polypropylene liner is more conformable to run through commercial plotters and releases easily to help avoid stretching and distortion of design.Offers Excellent Blast Resistance and High Adhesion to Stone Ideal for die-cutting, flatbed and friction fed formats,3M™ Die-Cut Sandblast Stencil 519YT helps protect granite, marble and other stone surfaces during blasting applications. It can be used with most stencil press equipment.
Protects granite, marble and other stone surfaces during blasting operations
It is recommended that this stencil be applied to a warm, clean and dry surface. When the stencil is applied to cold stone surfaces it is possible for condensation to form as the stone warms. Condensation can affect the performance of the stencil’s rubber adhesive. To minimize shrinkage, allow rubber backing to relax before applying to the stone. Rub down firmly to adhere stencil to the stone. Use 3M™ Sandblast Filler #2 to help increase adhesion and hold stencil to polished stone surfaces. Use 3M™ Sandblast Filler #3 on axed or frosted surfaces if increased adhesion is desired.
15" X 10 Yd. 18-3/4" X 10 Yd.
21" X 10 Yd. 25" X 10 Yd.
25" X 20 Yd. 30" X 10 Yd.
30" X 20 Yd.
Tractor Feed - IBM Plotter