3M #510 Hand-cut Sandblast Stencil
3M™ Sandblast Stencil - Hand-Cut Splice Free 510 is a 43 mil, green rubber backed sandblast stencil with a rubber adhesive and clear polyester release liner. The rubber backing is ideal for hand and die-cutting. Helps protect granite, marble and wood surfaces during sandblasting. Designed for single process technique and straight blasting, this stencil is also used for two-process shape carving.
Help protect granite, marble and wood during sandblasting operations
Excellent for wood sign sandblasting
Used for gaskets, cushioning and other applications where heavy, uniform caliper is desired
It is recommended that this stencil not be applied to cold stone because of possible condensation forming on the surface when placed in warm areas and should be applied to a warm, clean and dry surface. To minimize shrinkage, allow rubber backing to relax before applying to the stone. Rub down firmly to adhere stencil to the stone. Use 3M™ Sandblast Filler #2 to help increase adhesion and hold stencil to polish stone surfaces. Can be die-cut by reversing the liner so that the non-treated side of the liner is against the adhesive.
12-3/4" X 10 Yd.
18-3/4" X 10 Yd.
25" X 10 Yd.
30" X 10 Yd.
Low / Medium Tack
Hand cut / Friction Feed