air cleaning air drying - wenzco supplies online!

Return To The Main Homepage

 A Complete List Of Products
Previous Category Next Category
Air Cleaning - Drying
Air Cleaning/ Drying

Dust Collectors

Wenzco Supplies Reverse Pulse Cartridge Dust Collectors
1250, 2500, 3500 and 4900 CFM (larger units available)

*High efficienct cartridges for filtration efficiency of 99.7% against 1/2 micron particles.
*Filters are manually cleaned with a simple pulse
of compressed air (shutdown of system not required for cleaning)
*Filtered air can be returned to your shop in most
applications
*Abrasive resistant air inlet to extend filter life
*Acoustical dampering package standard with
each unit
*208-230/460 Volt 3 phase TEFC motors
*Electric package: soft motor start, variable
frequency drive, thermal motor protection, motor
fault & report monitoring and automatic load
compensating controls
*Barrel kit for use with 55 gal. drum to collect dust (on 2500, 3500 and 4900 cfm units only)
*One year warranty
*Optional motor starting packages available

Dust Collector Bags

We sell dust collector bags for Ruemelin dust collectors and other models. Call with your requirements

Cat. No. DUSTCOBA5-6
5' - 6" For Ruemelin

Cat. No. DUSTCOBA6-0
6' - 0" For Ruemelin

Air Filtering Equipment

How refrigerated air dryers work: Compressed air enters a heat exchanger and is pre-cooled. The compressed air then enters the air-to-refrigerant heat exchanger where it is further cooled by the refrigeration system. As the air is cooled, water vapor condenses into liquid droplets. The air and entrained water droplets then enter the separator where liquid water is removed. An automatic drain discharges the collected water from the system.


Hankison PR Series Refrigerated
Compressed Air Dryers


Hankison Air-Cooled 
Aftercoolers

Hankison air-cooled aftercoolers use ambient air to cool the hot air leaving an air compressor (typically 180 to 350F) to usable levels (100 to 120F). As the air cools, about 70% of the water vapor present condenses into liquid water which should be removed with a separator. Aftercoolers can be installed so that this normally wasted heat can be used to heat your shop.

Heavy duty metal construction

Slide gauge to indicate when to change filter

Removes:
-All solids 3 microns & larger
-Liquid load up to 25,000 ppm by weight
-99% of Water droplets
-44% of aerosols

Cat. No. SEPAMO60 - 60 CFM
Cat. No. SEPAMO100 - 100 CFM

Many other sizes available


Hankison Grade 9 Moisture
Separator/Filter

Hankinson Water-Cooled Aftercoolers

Hankison water-cooled aftercoolers consist of a shell-and-tube heat exchanger in which compressed air in the tubes are cooled to within 10 to 20F (6 to 11C) of the temperature of the cooling water in the shell. As the air cools, up to 70% of the water vapor present condenses to a liquid which can then be removed by a separator.
Copyright © 2005 Wenzco Supplies Corporation Questions/Comments?
Previous Category Next Category
Download our monthly sales flyer today!
For Orders or Information
Call Us @ 1 (800) 346-7805
We carry an extensive line of products. Please
call us if you can't find what you need!
We have a wide variety of used equipment
for sale. We also purchase used equipment.